This blower can run at CCW direction only.Reverse the impeller running direction can not change the air direction. Filter onto the inlet to protect the blower from dust and water. Keep the environmental temperature as low as possible to make the blower lifetime longer. This is internal drive and speed controllable version blower, external driver board is not required.Certification: ce, RoHS, ETL Warranty: 1 Year After-sales Service Provided: Online support Life time(MTTF): >20,000hours (under 25 degree C) Weight: 80 grams Housing material:PC Unit size: D70mm *H37mm Motor type:Three Phase DC Brushless Motor Outlet diameter: OD17mm ID12mm Controller: external Static pressure: 6.8kPaBrand name: Wonsmart High pressure with dc brushless motor Blower type: Centrifugal fan Voltage: 24vdc Bearing: NMB ball bearing Type: Centrifugal Fan Applicable Industries: Manufacturing Plant Electric Current Type: DC Blade Material: plastic Mounting: Ceiling Fan Place of Origin:Zhejiang, China Voltage:24VDCWS7040-24-V200 blower can reach maximum 22m3/h airflow at 0 kpa pressure and maximum 6.8kpa static pressure. It has maximum output air power when this blower run at 3kPa resistance if we set 100% PWM. It has maximum efficiency when this blower run at 5.5kPa resistance if we set 100% PWM. Other load point performance refer to below P-Q curve：(1)WS7040-24-V200 blower is with brushless motors and NMB ball bearings inside which indicates very long life time; MTTF of this blower can reach more than 20,000 hours at 20 degree C environmental temperature. (2)This blower needs no maintence (3)This blower drived by a brushless motor controller have many different control functions such as speed regulation,speed pulse output,fast acceleration, brake etc.it can be controlled by intelligent machine and equipment easily. (4) Drived by brushless motor driver the blower will have over current, under/over voltage,stall protections.Industrial fans and blowers are machines whose primary function is to provide and accommodate a large flow of air or gas to various parts of a building or other structures. This is achieved by rotating a number of blades, connected to a hub and shaft, and driven by a motor or turbine. The flow rates of these mechanical fans range from approximately 200 cubic feet (5.7 m3) to 2,000,000 cubic feet (57,000 m3) per minute. A blower is another name for a fan that operates where the resistance to the flow is primarily on the downstream side of the fan.Q:Customer: May I use this blower for Medical device? A: Yes, this is one blower of our company which can be used on Cpap and ventilator. Q: What’s is the maxmum air pressure? A: As it shown in the drawing, the maxmum air pressure is 6.5 Kpa.This blower can be widely used onto air cushion machine, CPAP machine, SMD soldering rework station.